API 6D Bolted Bonnet Swing Check Valve, 20 Inch, 150 LB


API 6D Bolted Bonnet Swing Check Valve Provider: Bolted Bonnet Swing Type Check Valves, ASTM A216 WCB, 20 Inch, 150 LB, API 600, API 6D, BS 1868, ASME B16.34.

Categories

Check Valves

Tags

Swing Check Valves , 20 Inch Check Valve , API 6D Check Valve

Detail Information

API 6D Bonnet Type Swing Check Valve

Design Standard: API 600, API 6D, BS 1868, ASME B16.34
Body Material: ASTM A216 WCB
Nominal Diameter: 20 Inch, DN500
Pressure: Class 150 LB, PN20
Face To Face: ASME B16.10, API 6D, BS EN 558
Test And Inspection: ISO 5208, API 600, BS 6755
Feature: Bolted Cover

Product Range

Size: NPS 2 - 36 Inch
Pressure: Class 150-2500 LB
Design: API 600, API 6D, BS EN 13709, ASME B16.34
Body Material: ASTM A216 WCB, ASTM A352 LCB, ASTM A217 WC6, ASTM A217 WC9, ASTM A217 C12, ASTM A217 C5, CF8, CF8M, CF3, CF3M
End Connection: ASME B16.5, ASME B16.47, ASME B1.20.1, ASME B16.11,DIN 2453-2551, ASME B16.25
Ranges of Materials: nine grades of carbon, low alloy and stainless steels, other grades of alloy and stainless steel

Available Modifications For VERVO Steel Valves
 
Trim changes
End connection modifications
Packing and gasket changes
Operator mounting
Handwheel extensions
Pressure equalizing
Customer specified coatings
Weld end bore changes
Oxygen & chlorine cleaning & packaging
 
A)Eyebolt
For 150Lb-8″,300Lb-8″, 600Lb-6″,900Lb/1500Lb/ 2500Lb-4″ & over.
  B)BC
Bolted cover. welded cover and pressure seal bonnet in services requiring frequent cycling or with high pressure/temperature variations.
  C)End Connections
A choice of flanged, RTJ flanged or butt-welding end for piping flexibility.
D)Body-to-Cover Joint
A male and female joint or tongue and groove joint are used 150Lb to 600Lb valves. Ring joint is used in the body to cover connection in 900Lb & higher-rated valve.
  E)Outside Lever And Weight
All external hinge pin swing check valves 12″ and smaller are available with an optional outside lever and weight, internal hinge is available with all swing check valves.
  F)Seat Rings
Separate heavy-duty, full ported rings for easy maintenance. Screwed or welded connection into body.
G)HCU weighted mechanical accumulator
This design can be used to either dampen or assist in closing the check valve disc depending on orientation. by using the hydraulic control unit to buffer the action of the disc, the valve opens at lower flow rates.
       


Applicable Standards:

STEEL CHECK VALVES, API 6D
STEEL CHECK VALVES, ISO 14313
STEEL VALVES, ASME B16.34
FACE TO FACE, ASME B16.10
END FLANGES, ASME B16.5
BUTTWELDING ENDS, ASME B16.25
INSPECTION AND TEST, API 598, API 6D

Design descriptions:

BC, BOLTED COVER
SWING TYPE, ANTI-ROTATION DISC
RENEWABLE SEAT RINGS
NON-PENETRATE DISC SHAFT
HORIZONTAL OR VERTICAL SERVICE
FLANGED OR BUTT-WELDING ENDS
 
Size NPS 2 Inch - 36 Inch
Pressure Rating Class 150-2500 LB
Material 2"-36": WCB, LCB, WC6, WC9, C12, C5, CF8, CF8M, CF3, CF3M
Design & Manufacturing Standard API 600, BS 1868, ASME B16.34
Face to Face ASME B16.10, API 6D, BS EN 558
End Connection ASME B16.5, ASME B16.47, ASME B1.20.1, ASME B16.11, DIN 2453-2551, ASME B16.25
Test and Inspection ISO 5208, API 600, BS 6755
Operation Method Swing Type, Lifting Type
Share on

Next: ASTM A351 CF8 Non Return Check Valve, DIN 3840, DN50, PN16

Previous: ASTM A216 WCB Non Return Swing Check Valve, 2 Inch, 600 LB

Comment Form

Nickname*:
E-mail*:
Rate*:
Comments*:

Similar Products